• Jilanico@lemmy.world
    link
    fedilink
    English
    arrow-up
    8
    ·
    11 months ago

    If the arm in the picture could bend, the magnet would just stick to the front bumper

    What if the magnet was of similar mass to the truck? Assuming it could be made to balance, maybe this actually might work to move the truck such that it meets the magnet in the middle. Then the arm could slide the magnet upwards to detach, reposition it, and repeat. Of course, there are much better ways to make a truck move, but maybe it could work?

    • funnystuff97@lemmy.world
      link
      fedilink
      arrow-up
      20
      ·
      11 months ago

      Then the arm could slide the magnet upwards to detach, reposition it, and repeat.

      This would work, but this is the point where you’d need to involve an external energy source. If you move the truck-magnet-arm system such that the whole system reaches a steady state and the truck has “moved” (relative to an outside observer), to continue any motion, you need to disturb the steady state to reposition the arm and create a new resting point. Doing so would require energy. From a battery, or an engine, or whatever, but you need energy from an external source. And so we’re right back to where we started: instead of all this jazz, why not just spend energy to spin the wheels instead?

    • AVincentInSpace@pawb.social
      link
      fedilink
      English
      arrow-up
      6
      ·
      11 months ago

      That could work, yes. You would have to unstick the magnet from the bumper every time – or alternately just leave it attached and use it as a tow hook – but it would work

    • captainlezbian@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      11 months ago

      Because the mass is shared. You could get it to move the truck by moving a giant magnet forward but so long as it’s attached to the truck you’re only ever getting out the movement you put in to the magnet.

      • Jilanico@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 months ago

        Agreed. It could work but it’s not a perpetual motion machine and would require energy input to make it work.