• Joelk111@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    11 months ago

    Me too, it was super late. However, holy crap it’s different in quality between manufacturers.

    My RSX has great ABS, even on gravel or in the snow. It does way better than I could in most situations. Coming from my '98 corolla (without ABS) to the RSX was a massive improvement in braking.

    The ABS on my Crown Vic, which is one year newer than my RSX, just doesn’t work. You don’t lock up the wheels, so I guess by the definition of ABS, it works. However, the ABS also increases your stopping distance by a lot. I need to figure out the best way to disable it. Pulling a fuse doesn’t work, as that’s also the fuse for the dash instruments. When I do it I’ll do a test to make sure that the stopping distance is improved by as much as I think it will be.

    • XeroxCool@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      11 months ago

      That’s interesting, so it is pulsing under heavy braking? Is that a common problem? I wonder if either unplugging all the sensors or maybe the module itself would disable it. Just the sensors might freak it out and cause constant abs actuation each startup until it confirms the fault.

      • Joelk111@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        11 months ago

        Yeah, the ABS “works” as far as I can tell. The wheels don’t lock up. It pulses. It’s just way too generous towards not locking up the brakes, and doesn’t pulse with a high enough frequency, from what I can tell. My vic is lifted for offroading, so it’s a real issue stopping on gravel.

        I’m thinking pulling a wheel speed sensor would be the easiest, but I haven’t looked into it yet.

        • XeroxCool@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          11 months ago

          Might have to pull all 4 or else it’ll be 3-wheel braking for the first few miles. I assume the wheels are all the same size? Are the abs wires stained at all with the lift? Might be worth watching them all with a monitor to see if any are acting up. I think Forscan is available directly from their website. It’s a pirated copy of Ford’s IDS, basically, and I know it was recently pulled from the Google store. It works for ios and windows too and can be connected by usb or bluetooth/wifi obdii dongle.

          • Joelk111@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            11 months ago

            In the RSX one came lose, and it disabled the entire system, so that’s how I assumed it worked in the vic as well, but I guess I’m not sure.

            All wires are sustained from when I bought the vehicle, some could’ve been compromised previously.

            I have an OBDII BT scanner, I might check out Forscan, thanks!